How to update a Follower SAT on an iOS device

This article describes the procedure to do an over-the-air update of your kien SAT in Follower mode.

Note: This is the best method to update a SAT on an iOS device.

Here is how to update a Follower SAT on an iOS device:

Step 1. Plug your SAT to the power using the power supply

Step 2. Power on your SAT

Step 3. Make sure that your SAT is connected to your SUB

Step 5. Open the kien app

Step 6. On the SUB Leader tab, scroll down.

Step 7. Click on the SAT that you want to update.

Step 8. Scroll down

Step 9. Click on 'Firmware' 

Step 10. Click on the 'Update' button

Step 11. Your speaker is updating. It should take between 5 and 10 minutes 

Step 12. The update was successful!